1 dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change n features the 700 series connector has a superior ejector with a unique flexible latch. terminals are palladium plated and have an excellent cost performance ratio. the solder dip section is a 0.5 mm (0.020 in.) square and can be used in a f 0.8 mm (0.031 in.) through hole. special strain relief prevents breakage. two kinds of keys and bump polarization prevent incorrect insertion. connectors with 4 mm (0.157 in.) long tails are also available for mounting on multilayer pc boards. n specifications item operating temperature range current rating voltage rating contact resistance insulation resistance dielectric strength insertion force withdrawal force applicable wire applicable wire-wrapping wire applicable pc board (standard) specification C55 c to +105 c dc 1 a ac 250 v 120 m w max. (dc 6 v, 0.1 a) 1000 m w min. (dc 500 v) ac 500 v for 1 minute 3.5 kg max. (10 pins), 21 kg max. (60 pins) 0.25 kg min. (10 pins), 2.5 kg min. (60 pins) flat cable: 1.27 mm (0.050 in.) pitch awg #28 (stranded wires) or awg #30 (solid wire) awg #26 to #30 (solid wire) 1.6 mm (0.062 in.) for standard terminal, 3.2 mm (0.125 in.) for long tail n materials materials polyester (ul94v-0) copper alloy contact terminal gold palladium item insulating material conductor plating pc board connectors 700 series
2 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change idc header m6 series n dimensions a b c d 2.54 8.8 6.40 2.54 2-m2.6 depth 4 (0.157) 19.1 9.1 6 29.1 6.3 e 4.1 f 1.27 e 1.27 g h j 4 [cover (closed end type)] [strain relief] [main body] [with cable] note : the polarity of a header is determined by specifying pins to be removed which is designated by the last two digits of the part number (e.g. fcn-70p010-au/m6#04). (0.346) (0.252) (0.100) (1.15) (0.752) (.358) (.236) (.248) (0.050) (0.050) (0.161) (0.100) unit: mm (in.) n part numbers and dimensions number of contacts 10 14 16 20 26 30 34 40 50 60 without mini latch fcn-707p010-au/0 fcn-707p014-au/0 fcn-707p016-au/0 fcn-707p020-au/0 fcn-707p026-au/0 fcn-707p030-au/0 fcn-707p034-au/0 fcn-707p040-au/0 fcn-707p050-au/0 fcn-707p060-au/0 dimensions: mm (in.) a 32.0 (1.25) 37.1 (1.46) 39.62 (1.56) 44.7 (1.76) 52.32 (2.06) 57.4 (2.26) 62.48 (2.46) 70.1 (2.76) 82.8 (3.26) 95.5 (3.76) b 26.80 (1.06) 31.90 (1.26) 34.42 (1.36) 39.50 (1.56) 47.12 (1.86) 52.20 (2.06) 57.28 (2.26) 64.90 (2.56) 77.60 (3.06) 90.30 (3.56) c 18.3 (.720) 23.4 (.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.1 (2.72) 81.8 (3.22) d 10.16 (.400) 15.24 (.600) 17.78 (.700) 22.86 (.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) e 11.43 (.450) 16.51 (.650) 19.05 (.750) 24.13 (.950) 31.75 (1.25) 36.83 (1.45) 41.91 (1.65) 49.53 (1.95) 62.23 (2.45) 74.93 (2.95) f 13.43 (.528) 18.53 (.729) 21.03 (.828) 26.13 (1.03) 33.73 (1.33) 38.83 (1.53) 43.93 (1.73) 51.53 (2.03) 64.23 (2.53) 76.93 (3.03) j 20.2 (.795) 25.3 (.996) 27.8 (1.09) 32.9 (1.29) 40.5 (1.59) 45.6 (1.79) 50.7 (2.00) 58.3 (2.29) 71.0 (2.79) 83.7 (3.29) with mini latch fcn-707p010-au/m6 fcn-707p014-au/m6 fcn-707p016-au/m6 fcn-707p020-au/m6 fcn-707p026-au/m6 fcn-707p030-au/m6 fcn-707p034-au/m6 fcn-707p040-au/m6 fcn-707p050-au/m6 fcn-707p060-au/m6 h 18.3 (.720) 23.4 (.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.1 (2.72) 81.8 (3.22) g 13.43 (.528) 18.53 (.729) 21.03 (.828) 26.13 (1.03) 33.73 (1.33) 38.83 (1.53) 43.93 (1.73) 51.53 (2.03) 64.23 (2.53) 76.93 (3.03) note: for 'lite pagos' add -hn to part number.
3 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change idc tools n features ? special idc tools are used to assemble fcn-700 series connectors and flat cables. ? all tools are simple and easy to use, even for first- time users. ? users who have idc tools manufactured by us do not have to buy hand presses or cutting cables. they are compatible. please buy the locator plate designed for your connectors. ? the number of pins can be changed easily by setting the connector guide to a specified pin hole. ? the cable cutter remains sharp, giving fast, easy cutting with a long life. notes: ? please ask for an operation instruction manual if needed. ? if you have any questions about fujitsu idc tools, please contact your local fujitsu office or your local fujitsu distributor. hand press cable cutter locator plate n cable termination ? flat cable termination diagram there are many ways to connect connectors to flat cables. choose the best connection method for your application from the figure below. the orientation of a connector is important when you specify polarity to prevent incorrect insertion of 700 series clip types. discrete wire insulation displacement connection is possible, but cable assembly is not simple. please contact us for details. ? cable length the length of a cable is indicated in units of cm, as shown in the figure below. the minimum length is 3 cm. the specified tolerance of the cable length is 10% for l 10 cm ( 5 mm min.), 1 cm for 10 cm < l < 100 cm, (l/100 cm + 2 cm) for 100 cm l 1800 cm, and 20 cm for 1800 cm < l. type number connector model 700 series 707p series wire no.1 l cm wire no.1 l cm wire no.1 wire no.1 wire no.1 wire no.1 wire no.1 wire no.1 wire no.1 wire no.1 no. 2 no. 1 no. 3 no. 4 n part numbers for idc tools name cable cutter (common) hand press (common) locator plate 700 series socket locator plate 700 series plug (for 707p series) locator plate 700 series plug (for 707p series m6 type) part number fcn-707t-t001/h fcn-707t-t101/h fcn-707t-t022/h fcn-707t-t025/h fcn-707t-t036/h the hand press and the cable cutter can be used for other idc connectors.
4 700 series dimensions are in millimeters (inches) www.fcai.fujitsu.com specifications subject to change ? 2001 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev. 09/2001 japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info.marketing@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 375-8560 fax: (65) 273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
